Wed, 16 Jan 2019 21:07:59 +0000 Darron Broad disable this for now. the UART module has various changes which are not default tip
Wed, 16 Jan 2019 16:54:07 +0000 Darron Broad config fixes, however, they have renamed a ton more including all the UART registers
Fri, 11 Jan 2019 13:24:53 +0000 Darron Broad ws
Fri, 11 Jan 2019 13:24:32 +0000 Darron Broad this chip is still unsupported and gpasm seems to be a dead project
Fri, 11 Jan 2019 13:12:03 +0000 Darron Broad not sure about these chips but glance shows some kind of sector
Fri, 11 Jan 2019 13:08:06 +0000 Darron Broad not sure why this needed more room but make it so
Fri, 11 Jan 2019 13:06:37 +0000 Darron Broad workaround some dumb bug
Fri, 11 Jan 2019 12:17:52 +0000 Darron Broad not supported yet or ever
Thu, 10 Jan 2019 14:27:46 +0000 Darron Broad gpasm BADROM warnings for some pic18f new algo chips. will evaluate later.
Fri, 30 Nov 2018 14:32:49 +0000 Darron Broad add these devices (untested of course)
Tue, 20 Mar 2018 14:17:16 +0000 Darron Broad add a few more
Tue, 20 Mar 2018 14:02:06 +0000 Darron Broad new chips
Sat, 11 Mar 2017 01:53:17 +0000 Darron Broad no more with this now. move onto pic18F USB, maybe look
Sat, 11 Mar 2017 01:50:56 +0000 Darron Broad the PLL is actually very unstable. who can say, it's a POS
Sat, 11 Mar 2017 01:38:01 +0000 Darron Broad FFS. not only did it always work ok but it can easily do
Sat, 11 Mar 2017 01:32:14 +0000 Darron Broad use a sane timeout every where because i got tripped when
Sat, 11 Mar 2017 00:59:37 +0000 Darron Broad optimise without error check
Sat, 11 Mar 2017 00:44:42 +0000 Darron Broad add support for this only if demanded. it's not
Sat, 11 Mar 2017 00:33:53 +0000 Darron Broad changing things it what broke things last time, revert last change
Sat, 11 Mar 2017 00:12:45 +0000 Darron Broad never bounce that i suppose
Fri, 10 Mar 2017 22:54:18 +0000 Darron Broad calling uart stop before uart init is breaking something.
Fri, 10 Mar 2017 21:39:41 +0000 Darron Broad test k22 instead, my k20 chip is completely fukt
Fri, 10 Mar 2017 21:04:07 +0000 Darron Broad revert that change, it's band-aid for something i have broken
Fri, 10 Mar 2017 20:26:51 +0000 Darron Broad somehow i got to look at the worst chip ever
Fri, 10 Mar 2017 19:28:36 +0000 Darron Broad do it in right place, also see if this was the problem because
Fri, 10 Mar 2017 19:26:55 +0000 Darron Broad detect them properly at least
Fri, 10 Mar 2017 19:24:38 +0000 Darron Broad these faults do not actually occur but trap them anyway
Fri, 10 Mar 2017 18:40:06 +0000 Darron Broad if left for a few minutes receiving notice the UART begins
Fri, 10 Mar 2017 18:06:22 +0000 Darron Broad no change. will next look at signals and see what is going
Fri, 10 Mar 2017 18:03:22 +0000 Darron Broad see if this fixes this chip.
Fri, 10 Mar 2017 17:19:16 +0000 Darron Broad missing file
Fri, 10 Mar 2017 16:58:17 +0000 Darron Broad there is a bug. if the firmware is empty and the boot loader
Fri, 10 Mar 2017 09:59:48 +0000 Darron Broad need to wait a bit longer. to upload i need to press
Fri, 10 Mar 2017 09:54:57 +0000 Darron Broad hmm. 12M XTAL needs 16M XTAL settings for some reason.
Fri, 10 Mar 2017 09:39:04 +0000 Darron Broad switch chip, however, this bastard isn't running at 48 MHz
Fri, 10 Mar 2017 08:58:32 +0000 Darron Broad add config for pic18f2550 and notice immediately that the UART
Mon, 06 Mar 2017 18:51:53 +0000 Darron Broad no point using z80 style djnz macro here
Sat, 25 Feb 2017 17:56:03 +0000 Darron Broad as cowboy does
Sat, 25 Feb 2017 17:37:52 +0000 Darron Broad fix typo and turn off UART when done. can't remember why i wanted
Sat, 25 Feb 2017 17:22:21 +0000 Darron Broad merged
Sat, 25 Feb 2017 17:21:48 +0000 Darron Broad use clock here, not that it offers anything more than
Fri, 24 Feb 2017 22:46:09 +0000 Darron Broad merged
Fri, 24 Feb 2017 22:45:48 +0000 Darron Broad up 2 date. can't build anything until gputils updated
Fri, 24 Feb 2017 19:58:27 +0000 Darron Broad erase block is massive on this chip
Fri, 24 Feb 2017 19:44:13 +0000 Darron Broad it boots, how is unknown, a miracle
Fri, 24 Feb 2017 18:24:13 +0000 Darron Broad this chip has no memory at 0x100 for some reason
Fri, 24 Feb 2017 18:13:15 +0000 Darron Broad pic18f13k50 example added, however, self-write isn't working for
Fri, 24 Feb 2017 17:58:28 +0000 Darron Broad PGM pin is a pain in the arse i forgot about.
Fri, 24 Feb 2017 14:45:02 +0000 Darron Broad hint
Fri, 24 Feb 2017 14:44:19 +0000 Darron Broad uart on standard location
Fri, 24 Feb 2017 14:04:19 +0000 Darron Broad can't make K42 example because gpasm doesn't support it
Fri, 24 Feb 2017 04:07:22 +0000 Darron Broad no fake eeprom allowed
Wed, 22 Feb 2017 13:03:19 +0000 Darron Broad do it like this after all.
Wed, 22 Feb 2017 08:32:29 +0000 Darron Broad merged
Wed, 22 Feb 2017 08:32:17 +0000 Darron Broad prefer TYPE after all
Tue, 21 Feb 2017 17:27:15 +0000 Darron Broad fix mangle here as well
Tue, 21 Feb 2017 17:17:11 +0000 Darron Broad don't care if this is not accurate just prefer it
Tue, 21 Feb 2017 17:15:27 +0000 Darron Broad do this until it breaks, if ever.
Tue, 21 Feb 2017 17:13:09 +0000 Darron Broad fix regression for modern pic18 uart
Tue, 21 Feb 2017 10:59:30 +0000 Darron Broad mentioned on wiki, no code here