changeset | 66ea2e03c2d7 |
---|---|
branch | default |
bookmark | |
tag | tip |
user | "Darron Broad" <darron@kewl.org> |
description | i think __linux__ was the previous choice |
files | globals.c linux.c mib.c mini_snmpd.c mini_snmpd.h |
changeset | e0905f39d260 |
---|---|
branch | |
bookmark | |
tag | |
user | "Darron Broad" <darron@kewl.org> |
description | tidy and apply unusual tab rule |
files | linux.c mib.c |
changeset | 0509171eb807 |
---|---|
branch | |
bookmark | |
tag | |
user | "Darron Broad" <darron@kewl.org> |
description | not float |
files | linux.c |
changeset | 50616a8ddddb |
---|---|
branch | |
bookmark | |
tag | |
user | "Darron Broad" <darron@kewl.org> |
description | i wrote that using my brain |
files | linux.c |
changeset | db2c6945e460 |
---|---|
branch | |
bookmark | |
tag | |
user | "Darron Broad" <darron@kewl.org> |
description | don't use double because not really needed after all |
files | linux.c |
changeset | aba7c0117ecc |
---|---|
branch | |
bookmark | |
tag | |
user | "Darron Broad" <darron@kewl.org> |
description | after configure, remove LIBCONFUSE because openwrt is never going to need it |
files | Makefile.openwrt |
changeset | 45e8e440d3b1 |
---|---|
branch | |
bookmark | |
tag | |
user | "Darron Broad" <darron@kewl.org> |
description | get signal/noise from O/S rather than using /proc |
files | linux.c |
changeset | 2abf91b0be29 |
---|---|
branch | |
bookmark | |
tag | |
user | "Darron Broad" <darron@kewl.org> |
description | apply STYLE |
files | mib.c |
changeset | 3ce76810dfae |
---|---|
branch | |
bookmark | |
tag | |
user | "Darron Broad" <darron@kewl.org> |
description | move this to the right file for now and next rewrite it, however, using /proc seems popular in mini snmpd :-) |
files | linux.c utils.c |
changeset | e2182306ab0d |
---|---|
branch | |
bookmark | |
tag | |
user | "Darron Broad" <darron@kewl.org> |
description | this is working but reads signal from PROC which will be replaced later EG. ./mini_snmpd -c kewl -L London -C root@kewl.org -t 1 -d /overlay,/tmp -i br-lan,eth1,wlan0,wlan0-1 -v -n -w wlan0 Listening on port 161/udp and 161/tcp updating the MIB (full) updating the MIB (full) ... $ snmpwalk -v1 -c kewl 192.168.0.181 1.3.6.1.4.1.762 SNMPv2-SMI::enterprises.762.2.5.2.1.1.1 = INTEGER: 1 SNMPv2-SMI::enterprises.762.2.5.2.1.3.1 = STRING: "wlan0" SNMPv2-SMI::enterprises.762.2.5.2.1.7.1 = INTEGER: -256 SNMPv2-SMI::enterprises.762.2.5.2.1.8.1 = INTEGER: -67 |
files | mib.c mini_snmpd.c |