Thu, 28 Oct 2021 16:05:45 +0100 Darron Broad reset b4 programming default tip
Wed, 17 Feb 2016 23:47:44 +0000 Darron Broad add dependancy
Wed, 17 Feb 2016 23:43:36 +0000 Darron Broad the ones that got away
Wed, 17 Feb 2016 23:40:51 +0000 Darron Broad WS
Wed, 17 Feb 2016 23:27:22 +0000 Darron Broad time-out after 1 second (testing if reasonable).
Wed, 17 Feb 2016 16:35:42 +0000 Darron Broad start off because boot loader has just turned it off..
Wed, 17 Feb 2016 13:23:07 +0000 Darron Broad called PROG button on there and it works a treat. no more fiddling
Wed, 17 Feb 2016 13:10:26 +0000 Darron Broad add missing
Wed, 17 Feb 2016 13:04:24 +0000 Darron Broad bootload-en banished from this fork forever
Wed, 17 Feb 2016 12:54:49 +0000 Darron Broad remove BOOTLOAD-EN from everywhere, it's evil
Wed, 17 Feb 2016 12:48:55 +0000 Darron Broad test this.
Wed, 17 Feb 2016 12:39:46 +0000 Darron Broad will test usb next
Wed, 17 Feb 2016 12:14:29 +0000 Darron Broad remove BOOTLOAD-EN from all serially attached chipkit pi boards
Wed, 17 Feb 2016 02:04:52 +0000 Darron Broad firmware passed on SDXL
Sat, 30 Jan 2016 00:32:00 +0000 Darron Broad back on pi9. BL all done for now.
Wed, 17 Feb 2016 01:20:25 +0000 Darron Broad move it move it... to doing something else
Wed, 17 Feb 2016 01:13:17 +0000 Darron Broad i lied, last tidy up
Wed, 17 Feb 2016 01:10:08 +0000 Darron Broad add comments.
Wed, 17 Feb 2016 01:04:12 +0000 Darron Broad clean up
Fri, 29 Jan 2016 22:47:27 +0000 Darron Broad don't use BOOTLOAD-EN on breadboard firmware
Fri, 29 Jan 2016 17:15:39 +0000 Darron Broad trim
Tue, 16 Feb 2016 14:29:12 +0000 Darron Broad remove those annoying and pointless messages
Tue, 16 Feb 2016 09:42:31 +0000 Darron Broad add missing
Tue, 16 Feb 2016 09:17:51 +0000 Darron Broad sdxl demo
Tue, 16 Feb 2016 08:21:13 +0000 Darron Broad optimise the build here as well
Tue, 16 Feb 2016 02:28:46 +0000 Darron Broad don't do that
Tue, 16 Feb 2016 02:24:34 +0000 Darron Broad try and get make everyting operational.
Tue, 16 Feb 2016 01:38:53 +0000 Darron Broad move to top as reminder it's edited
Tue, 16 Feb 2016 01:36:18 +0000 Darron Broad optimise
Tue, 16 Feb 2016 00:34:21 +0000 Darron Broad build in subdir obj
Tue, 16 Feb 2016 00:11:48 +0000 Darron Broad import new makefile. move local makefile into subdir.
Mon, 15 Feb 2016 16:09:56 +0000 Darron Broad not checked but believe nothing else needs doing here.
Mon, 15 Feb 2016 16:07:29 +0000 Darron Broad correct dependancy
Mon, 15 Feb 2016 14:37:15 +0000 Darron Broad add alternate programming methods.
Mon, 15 Feb 2016 04:22:34 +0000 Darron Broad all up to date now
Mon, 15 Feb 2016 04:18:10 +0000 Darron Broad wrap this all over
Mon, 15 Feb 2016 04:15:16 +0000 Darron Broad add new main back but this time don't build bloat for USB bootloader
Mon, 15 Feb 2016 03:56:24 +0000 Darron Broad will revisit this tomorrow to test it works and to see about
Mon, 15 Feb 2016 03:45:41 +0000 Darron Broad track these
Mon, 15 Feb 2016 03:44:27 +0000 Darron Broad split out from old Boardconfig
Mon, 15 Feb 2016 03:44:04 +0000 Darron Broad revert baud rate change and update with new config files from
Mon, 15 Feb 2016 03:20:39 +0000 Darron Broad merge in ugly set baud hack
Sun, 14 Feb 2016 23:14:13 +0000 Darron Broad add slow motion upload option
Sun, 14 Feb 2016 18:39:48 +0000 Darron Broad add breadboard target which uses FRCPLL
Sun, 14 Feb 2016 18:38:19 +0000 Darron Broad some missing info
Sun, 14 Feb 2016 17:59:32 +0000 Darron Broad fix bug
Sun, 14 Feb 2016 17:45:23 +0000 Darron Broad fix missing _
Sun, 14 Feb 2016 17:39:08 +0000 Darron Broad add 40Mhz breadboard bootloader?
Mon, 16 Mar 2015 08:55:13 +0000 Darron Broad this has a different memory map to the MX250 USB boot loader
Mon, 16 Mar 2015 08:50:53 +0000 Darron Broad move splitmem location.
Mon, 16 Mar 2015 08:38:53 +0000 Darron Broad add new device firmware
Sat, 14 Mar 2015 08:13:35 +0000 Darron Broad not necessary but for neatness this has been done
Wed, 11 Mar 2015 10:20:16 +0000 Darron Broad some info
Wed, 11 Mar 2015 10:06:51 +0000 Darron Broad spring cleaning completed.
Wed, 11 Mar 2015 10:04:59 +0000 Darron Broad update blinky for two targets
Tue, 10 Mar 2015 09:41:13 +0000 Darron Broad the lazy guide to make files
Tue, 10 Mar 2015 09:30:04 +0000 Darron Broad spring cleaning completed
Tue, 10 Mar 2015 09:16:32 +0000 Darron Broad add these files for MZ support.
Tue, 10 Mar 2015 09:12:54 +0000 Darron Broad spring cleaning continues
Mon, 09 Mar 2015 09:29:59 +0000 Darron Broad first build of firmware for majenko sdxl